产品特点 Product characteristics | 应用 Apply |
l 24V 单电源供电/24V single power supply l 额定电流测量范围±500A/Rated current measurement range ±500A l 工作温度范围：-40℃∽+85℃/Working temperature range: -40 ° C ∽+85 ° C l 输出信号：高速 CAN(500kbps)/Output signal: High speed CAN(500kbps) l 在温度范围内 0.5%的综合误差/A combined error of 0.5% over the temperature range l 在常温 25℃下 0.3%的综合误差/The combined error of 0.3% at room temperature 25℃ l 原副边隔离测量/Primary secondary side isolation measurement l 连接器类型：TE/AMP 1473672-1/Connector type: TE/AMP 1473672-1 | l 电池管理系统(SOC,SOH,SOF 等)的电流测量/Current measurement for battery management systems (SOC,SOH,SOF, etc.) |
电气参数 Electrical data(Ta=25℃±5℃) | ||||||
参数 parameter | 标志 symbol | 单位 unit | 最小值 Minimum value | 典型值 Typical value | 最大值 Maximum value | 测试条件 Test condition |
额定输入电流 Rated input current | Ipn | A | -500 | - | 500 | - |
测量电流范围 Measuring current range | Ipm | A | -530 | - | 530 | - |
供电电源电压 Supply voltage | Vc | V | 22.8 | 24 | 25.2 | - |
电源消耗电流 Power supply consumption current | Ic | mA | - | 35 | 50 | @25℃,Vc=24V，IP=0A |
电源消耗电流 Power supply consumption current | Ic | mA | - | 65 | 80 | @25℃,Vc=24V，IP=500A |
线性度误差 Linearity error | ε | %FS | -0.1 | - | 0.1 | @25℃ |
噪声电流 Noise current | Ioe | mA | -10 | 10 | @Ip =0,TA =25℃ | |
温漂 Temperature drift | TC | ppm/℃ | 70 | TA =-40～85℃ | ||
结构参数 Dimensions( mm)
产品特点 Product characteristics | 应用 Apply |
l 24V 单电源供电/24V single power supply l 额定电流测量范围±500A/Rated current measurement range ±500A l 工作温度范围：-40℃∽+85℃/Working temperature range: -40 ° C ∽+85 ° C l 输出信号：高速 CAN(500kbps)/Output signal: High speed CAN(500kbps) l 在温度范围内 0.5%的综合误差/A combined error of 0.5% over the temperature range l 在常温 25℃下 0.3%的综合误差/The combined error of 0.3% at room temperature 25℃ l 原副边隔离测量/Primary secondary side isolation measurement l 连接器类型：TE/AMP 1473672-1/Connector type: TE/AMP 1473672-1 | l 电池管理系统(SOC,SOH,SOF 等)的电流测量/Current measurement for battery management systems (SOC,SOH,SOF, etc.) |
电气参数 Electrical data(Ta=25℃±5℃) | ||||||
参数 parameter | 标志 symbol | 单位 unit | 最小值 Minimum value | 典型值 Typical value | 最大值 Maximum value | 测试条件 Test condition |
额定输入电流 Rated input current | Ipn | A | -500 | - | 500 | - |
测量电流范围 Measuring current range | Ipm | A | -530 | - | 530 | - |
供电电源电压 Supply voltage | Vc | V | 22.8 | 24 | 25.2 | - |
电源消耗电流 Power supply consumption current | Ic | mA | - | 35 | 50 | @25℃,Vc=24V，IP=0A |
电源消耗电流 Power supply consumption current | Ic | mA | - | 65 | 80 | @25℃,Vc=24V，IP=500A |
线性度误差 Linearity error | ε | %FS | -0.1 | - | 0.1 | @25℃ |
噪声电流 Noise current | Ioe | mA | -10 | 10 | @Ip =0,TA =25℃ | |
温漂 Temperature drift | TC | ppm/℃ | 70 | TA =-40～85℃ | ||
| Classify | Title | Download |
|---|
Leave your contacts and our engineers will help you to find the solution you are looking for.
The current sensor using the Hall effect open-loop principle can measure DC, AC, pulse and various irregular waveforms of current under the condition of electrical isolation.
KNOW MORE
Open loop current sensor based on the principle of Hall-effect It can be used for measuring AC,DC,pulsed and mixed current.
KNOW MORE
Open loop current sensor based on the principle of Hall-effect It can be used for measuring AC,DC,pulsed and mixed current.
KNOW MORE
Open loop current sensor based on the principle of Hall-effect It can be used for measuring AC,DC,pulsed and mixed current.
KNOW MORE
Open loop current sensor based on the principle of Hall-effect It can be used for measuring AC,DC,pulsed and mixed current.
KNOW MORE
Hall current sensor with open loop principle can measure any irregular waveform current such as AC, DC, pulsating DC, etc., easy to install, large measuring range, excellent temperature performance, strong overload capacity, 20 times instantaneous rated input without damage. This product is a special product for AsIn-ASIC-SOC core chip technology, new energy vehicles and other industries.
KNOW MORE
Open loop current sensor based on the principle of Hall-effect Itcan be used for measuring AC,DC,pulsed and mixed current.
KNOW MORE
Sensors with different rated input current and output voltage can be customized according to user requirements.
KNOW MORE
Using Hall effect and open-loop measurement principle, after TRMS calculation, the measured current is converted into DC current or voltage output proportional to the primary current, and the current sensor can measure DC, AC, pulse and various irregular waveforms of current under the condition of electrical isolation. It has the characteristics of high accuracy, high linearity, high integration, small size, simple structure and long-term stability.
KNOW MORE
Closed loop current sensor based on the principle of Hall-effect It can be used for measuring AC,DC, pulsed and mixed current.
KNOW MORE
Closed loop current sensor based on the principle of Hall-effect It can be used for measuring AC,DC, pulsed and mixed current.
KNOW MORE
Open loop current sensor based on the principle of Hall-effect It can be used for measuring AC,DC,pulsed and mixed current
KNOW MORE
Closed loop current sensor based on the principle of Hall-effect.It can be used for measuringAC,DC,pulsedand mixed curent.
KNOW MORE
Close loop current sensor based on the principle of Hall-effect.It can be used for measuring AC,DC,pulsed and mixed current.
KNOW MORE
A Hall current sensor based on the closed-loop magnetic balance principle can measure DC, AC, pulse and various irregular currents. The sensor is in current output mode and can be converted into voltage signal by external resistance according to customer demand.
KNOW MORE
The current sensor using the closed-loop principle of Hall effect can measure DC, AC, pulse and various irregularities under the condition of electrical isolation Waveform of current.
KNOW MORE
A Hall current sensor based on the closed-loop magnetic balance principle can measure DC, AC, pulse and various irregular currents. The sensor is in current output mode and can be converted from external resistance to voltage signal according to customer demand..
KNOW MORE
Close loop current sensor based on the principle of Hall-effect.It can be used for measuring AC,DC,pulsed and mixed current.
KNOW MORE
A Hall current sensor based on the closed-loop magnetic balance principle can measure DC, AC, pulse and various irregular currents. The sensor is in current output mode and can be converted into voltage signal by external resistance according to customer demand.
KNOW MORE
A Hall current sensor based on the closed-loop magnetic balance principle can measure DC, AC, pulse and various irregular currents. The sensor is in current output mode and can be converted from external resistance to voltage signal according to customer demand..
KNOW MORE
Hi! Welcome back.
How are you doing?
Let’s talk! We’ll provide the perfect solution for you！
Shanghai Freesor Sensor Technology Co. ,Ltd. was founded in 2005 by a number of overseas returnees with rich experience. It is a high-tech enterprise integrating design, research and development, production and sales.
Sales Center Add: Room 1405-1, Building B, 333 Haiyang 1st Road, Pudong New Area, Shanghai
Factory Add:Building 4, Keland Smart Energy Industrial Park, Guangming District, Shenzhen, Guangdong Province, China.
English
Russian
Chinese
