电参数/Electrical characteristics | |||||||||
型号 Tpye | FSM005LX | FSM010LX | FSM015LX | FSM020LX | FSM025LX | FSM030LX | FSM050LX | FSM075LX | |
IPN | 原边额定输入电流 Primary nominal input current | 5A | 10A | 15A | 20A | 25A | 30A | 50A | 75A |
IP | 原边电流测量范围 Measuring range of primary current | 0～±16A | 0～±32A | 0～±48A | 0～±64A | 0～±80A | 0～±96A | 0～±150A | 0～±150A |
输入引脚尺寸mm Input pin size mm | Φ0.8 | Φ0.8 | Φ1.0 | Φ1.4 | Φ1.4 | Φ1.6 | 2X1.6X1.5 | 2X1.6X1.5 | |
KN | 匝数比 Conversion ratio | 3:1500 | 2:2000 | 1:1500 | 1:2000 | 1:2500 | 1:3000 | 1:2500 | 1:3750 |
R | 内接测量电阻Ω Built-in measuring resistance Ω | 400±0.1% | 400±0.1% | 400±0.1% | 400±0.1% | 400±0.1% | 400±0.1% | 200±0.1% | 200±0.1% |
VOUT | 副边额定输出电压 Nominal output voltage | 4±0.5% | V | ||||||
VC | 电源电压 Supply voltage | ±15(±5%) | V | ||||||
Ic | 静态功耗 Static power consumption | <15 | mA | ||||||
Vd | 绝缘电压 Insulation voltage | 在原边与副边电路之间5 KV有效值/50Hz/1分钟 5 KV RMS /50Hz/1 min between primary and secondary side circuits | |||||||
εL | 线性度 Linearity | <0.1 | %FS | ||||||
X | di/dt跟随精度 di/dt follows accuracy | >50 | A/μs | ||||||
VO | 零点电失调电压 Zero offset voltage | 士20 | mV | ||||||
VOT | 失调电压温漂 Thermal drift of V0 | IPN=0 TA=-40～+85℃ <±0.5 | mV/℃ | ||||||
Tr | 响应时间 Response time | <1 | us | ||||||
TA | 工作环境温度 Ambient operating temperature | -40～+85 | ℃ | ||||||
TS | 贮存环境温度 Ambient storage temperature | -40～+125 | ℃ | ||||||
标准 Standard | GI/FS-0105 | ||||||||
Dimensions of drawing Pin elucidation
Electrical characteristics | |||||||||
Tpye | FSM005LX | FSM010LX | FSM015LX | FSM020LX | FSM025LX | FSM030LX | FSM050LX | FSM075LX | |
IPN | Primary nominal input current | 5 | 10 | 15 | 20 | 25 | 30 | 50 | 75A |
IP | Measuring range of primary current | 0～±16 | 0～±32 | 0～±48 | 0～±64 | 0～±80 | 0～±96 | 0～±150 | 0～±150 |
Input pin size mm | Φ0.8 | Φ0.8 | Φ1.0 | Φ1.4 | Φ1.4 | Φ1.6 | 2X1.6X1.5 | 2X1.6X1.5 | |
KN | Conversion ratio | 3:1500 | 2:2000 | 1:1500 | 1:2000 | 1:2500 | 1:3000 | 1:2500 | 1:3750 |
R | Built-in measuring resistance Q | 400±0.1% | 400±0.1% | 400±0.1% | 400±0.1% | 400±0.1% | 400±0.1% | 200±0.1% | 200±0.1% |
VOUT | Nominal output voltage | 4±0.5% | V | ||||||
VC | Supply voltage | ±15(±5%) | V | ||||||
Ic | Static power consumption | <15 | mA | ||||||
Vd | Insulation voltage | 5 KV RMS /50Hz/1 min between primary and secondary side circuits | |||||||
εL | Linearity | <0.1 | %FS | ||||||
X | di/dt follows accuracy | >50 | A/μs | ||||||
VO | Zero offset voltage | 士20 | mV | ||||||
VOT | Thermal drift of V0 | IPN=0 TA=-40～+85℃ <±0.5 | mV/℃ | ||||||
Tr | Response time | <1 | us | ||||||
TA | Ambient operating temperature | -40～+85 | ℃ | ||||||
TS | Ambient storage temperature | -40～+125 | ℃ | ||||||
Standard | GI/FS-0105 | ||||||||
| Classify | Title | Download |
|---|
Leave your contacts and our engineers will help you to find the solution you are looking for.
Using Hall effect and open-loop measurement principle, after TRMS calculation, the measured current is converted into DC current or voltage output proportional to the primary current, and the current sensor can measure DC, AC, pulse and various irregular waveforms of current under the condition of electrical isolation. It has the characteristics of high accuracy, high linearity, high integration, small size, simple structure and long-term stability.
KNOW MORE
Closed loop current sensor based on the principle of Hall-effect It can be used for measuring AC,DC, pulsed and mixed current.
KNOW MORE
Open loop current sensor based on the principle of Hall-effect It can be used for measuring AC,DC,pulsed and mixed current
KNOW MORE
Closed loop current sensor based on the principle of Hall-effect.It can be used for measuringAC,DC,pulsedand mixed curent.
KNOW MORE
Close loop current sensor based on the principle of Hall-effect.It can be used for measuring AC,DC,pulsed and mixed current.
KNOW MORE
A Hall current sensor based on the closed-loop magnetic balance principle can measure DC, AC, pulse and various irregular currents. The sensor is in current output mode and can be converted into voltage signal by external resistance according to customer demand.
KNOW MORE
The current sensor using the closed-loop principle of Hall effect can measure DC, AC, pulse and various irregularities under the condition of electrical isolation Waveform of current.
KNOW MORE
A Hall current sensor based on the closed-loop magnetic balance principle can measure DC, AC, pulse and various irregular currents. The sensor is in current output mode and can be converted from external resistance to voltage signal according to customer demand..
KNOW MORE
Hi! Welcome back.
How are you doing?
Let’s talk! We’ll provide the perfect solution for you！
Shanghai Freesor Sensor Technology Co. ,Ltd. was founded in 2005 by a number of overseas returnees with rich experience. It is a high-tech enterprise integrating design, research and development, production and sales.
Sales Center Add: Room 1405-1, Building B, 333 Haiyang 1st Road, Pudong New Area, Shanghai
Factory Add:Building 4, Keland Smart Energy Industrial Park, Guangming District, Shenzhen, Guangdong Province, China.
English
Russian
Chinese
