电参数/Electrical characteristics | ||||
型号 Type | FSM1005S | |||
Ip | 原边额定输入电流 Primary nominal input current | ±1000 | A | |
Ip | 原边电流测量范围 Measuring range of primary current | ±1500 | A | |
IsN | 副边额定输出电流 Secondary nominal output current | ±200 | mA | |
RM |
测量电阻范围 Measuring resistance | With±15V @Ip With±15V @lPM | Max18Ω max 7Ω | |
With±24V @lp With±24V @lPM | max 61Ω max 24Ω | |||
Vc | 电源电压 Supply voltage | ±15~±24(±5%） | V | |
Ic | 电流消耗 Current consumption | Vc=±15V 45mA±Is | mA | |
V | 绝缘电压 Insulation voltage | 在原边与副边电路之间6KV有效值/50Hz/1分钟 | ||
eL | 线性度 Linearity | <0.1 | %FS | |
lo | 零点失调电流 Zero offset current | TA=25℃ 〈±0.2 | mA | |
loT | 零点失调电流温漂 Thermal drift of I0 | I→0 <±0.5 | mA | |
Tr | 响应时间 Response time | ≤1 | μ s | |
f | 频带宽度(-3dB) Frequency bandwidth(-3dB) | DC～150 | kHz | |
TA | 工作环境温度 Ambient operating temperature | -40～+125 | ℃ | |
Ts | 贮存环境温度 Ambient storage temperature | -40～+150 | ℃ | |
标准 Standard | GI/FS-0105 | |||
Dimensions of drawing(mm)
1.Incorrect wiring may cause damage to the sensor. After the sensor is powered on, when the measured current passes through the arrow direction of the sensor, the in-phase voltage value can be measured at the output end.
2.The output amplitude of the sensor can be adjusted according to the user's needs.
3.Sensors with different rated input current and output voltage can be customized according to user requirements.
Type | FSM1005S | |||
Ip | Primary nominal input current | ±1000 | A | |
Ip | Measuring range of primary current | ±1500 | A | |
IsN | Secondary nominal output current | ±200 | mA | |
RM | Measuring resistance | With±15V @Ip With±15V @lPM | max 180 max 70 | |
With±24V @lp With±24V @lPM | max 610 max 240 | |||
Vc | Supply voltage | ±15~±24(±5%) | V | |
Ic | Current consumption | Vc=±15V 45mA±Is | mA | |
V | Insulation voltage | 6KV RMS /50Hz/1 min between primary and secondary side circuits | ||
eL | Linearity | <0.1 | %FS | |
lo | Zero offset current | TA=25℃ 〈±0.2 | mA | |
loT | Thermal drift of I0 | I→0 <±0.5 | mA | |
Tr | Response time | ≤1 | μ s | |
f | Frequency bandwidth(-3dB) | DC～150 | kHz | |
TA | Ambient operating temperature | -40～+125 | ℃ | |
Ts | Ambient storage temperature | -40～+150 | ℃ | |
Standard | GI/FS-0105 | |||
| Classify | Title | Download |
|---|
Leave your contacts and our engineers will help you to find the solution you are looking for.
Using Hall effect and open-loop measurement principle, after TRMS calculation, the measured current is converted into DC current or voltage output proportional to the primary current, and the current sensor can measure DC, AC, pulse and various irregular waveforms of current under the condition of electrical isolation. It has the characteristics of high accuracy, high linearity, high integration, small size, simple structure and long-term stability.
KNOW MORE
Closed loop current sensor based on the principle of Hall-effect It can be used for measuring AC,DC, pulsed and mixed current.
KNOW MORE
Closed loop current sensor based on the principle of Hall-effect It can be used for measuring AC,DC, pulsed and mixed current.
KNOW MORE
Open loop current sensor based on the principle of Hall-effect It can be used for measuring AC,DC,pulsed and mixed current
KNOW MORE
Closed loop current sensor based on the principle of Hall-effect.It can be used for measuringAC,DC,pulsedand mixed curent.
KNOW MORE
Close loop current sensor based on the principle of Hall-effect.It can be used for measuring AC,DC,pulsed and mixed current.
KNOW MORE
A Hall current sensor based on the closed-loop magnetic balance principle can measure DC, AC, pulse and various irregular currents. The sensor is in current output mode and can be converted into voltage signal by external resistance according to customer demand.
KNOW MORE
A Hall current sensor based on the closed-loop magnetic balance principle can measure DC, AC, pulse and various irregular currents. The sensor is in current output mode and can be converted from external resistance to voltage signal according to customer demand..
KNOW MORE
Hi! Welcome back.
How are you doing?
Let’s talk! We’ll provide the perfect solution for you！
Shanghai Freesor Sensor Technology Co. ,Ltd. was founded in 2005 by a number of overseas returnees with rich experience. It is a high-tech enterprise integrating design, research and development, production and sales.
Sales Center Add: Room 1405-1, Building B, 333 Haiyang 1st Road, Pudong New Area, Shanghai
Factory Add:Building 4, Keland Smart Energy Industrial Park, Guangming District, Shenzhen, Guangdong Province, China.
English
Russian
Chinese
