Application field
New energy field: lithium battery components, battery charging and discharging test system feedback devices, motor testing, etc
Particle acceleration field: Sampling feedback devices for high accuracy power supplies
Medical industry: Power sampling feedback for MRI
Rail transit field: converters and other high accuracy, high current testing
Laboratory application: High accuracy power measurement with power analyzer, reliable testing of metering level current
Instrumentation field: Feedback devices for current measurement in instrumentation
安全特性 Safety feature
参数 | 符号 | 单位 | 最小 | 标称 | 最大 | 备注 |
耐受电压 Withstand voltage | Ud | kV | -- | 2.5 | -- | 50/60Hz,1min |
瞬态隔离电压 Transient isolation voltage | TS | kV | -- | 5 | -- | |
相对漏电起痕指数 Relative leakage marking index | CTI | V | -- | 600 | -- | 无冷凝 |
一般特性 General feature
参数 | 符号 | 单位 | 最小 | 标称 | 最大 | 备注 |
工作温度范围 Operating temperature range | TA | ℃ | -25 | -- | 60 | |
储存温度范围 Storage temperature range | TS | ℃ | -40 | -- | 85 | |
相对湿度 Relative humidity | RH | % | 10 | -- | 80 | 无冷凝 |
电参数/Electrical characteristics
测试条件（环境温度25℃，供电电压±15V）Test conditions (ambient temperature 25℃, supply voltage ±15V)
参数 | 符号 | 单位 | 最小 | 标称 | 最大 | 备注 |
额定原边直流电流 Rated primary DC current | IPN DC | A | -500 | -- | 500 | |
额定原边交流电流 Rated primary AC current | IPN | A | -- | -- | 353.5 | |
测量电阻 Measuring resistance | RM | Ω | 0 | -- | 5 | |
副边电流 Secondary side current | IS | mA | -250 | -- | 250 | |
过载能力① Overload capacity ① |
| kA | -1.5 | -- | 1.5 | @100ms脉冲 |
电流变比 Current ratio | KN | -- | 1:2000 | -- | ||
供电电压 Supply voltage | UC | V | ±14.25 | -- | ±15.75 | |
电流消耗 Current consumption | IC | mA | -- | -- | 50 | 总消耗需累计IS |
输出噪声0…10Hz② Output noise 0... 10Hz② | Vno | ppm | -- | -- | 12.5 | |
输出噪声0…100Hz② Output noise 0... 100Hz② | -- | -- | 20 | |||
输出噪声0…1kHz② Output noise 0... 1kHz② | -- | -- | 32.5 | |||
零点失调电流② Zero offset current ② | IOE | ppm | -225 | -- | 225 | |
温度漂移系数② Temperature drift coefficient | TCIOE | ppm/K | -50 | -- | 50 | |
零点偏置稳定性② Zero bias stability ② | ppm/month | -25 | -- | 25 | ||
线性度② Linearity | εL | ppm | -125 | -- | 125 | |
总体准确度② Overall accuracy | XG | ppm | -500 | -- | 500 | |
电流跟随速度 Current following velocity | di/dt | A/μs | 100 | -- | -- | |
带宽（±3dB） Bandwidth (±3dB) | BW | kHz | -- | 100 | -- | 小信号，@0.5%IPM |
注①:测试信号为单脉冲，过冲后传感器会进入自恢复状态，状态指示灯灭，需要约50ms恢复到正常工作状态。 Note 1: The test signal is a single pulse. After overshooting, the sensor will enter the self-recovery state, and the status indicator will be off. It takes about 50ms to restore to the normal working state. | ||||||
注②:ppm数据均参考副边输出信号满度对应的IPN。 Note 2 :ppm data refer to IPN corresponding to the subside output signal full degree. | ||||||
传感器机械尺寸图 Mechanical dimensions of the sensor
单位：mm Unit：mm
| Classify | Title | Download |
|---|
Leave your contacts and our engineers will help you to find the solution you are looking for.
Hi! Welcome back.
How are you doing?
Let’s talk! We’ll provide the perfect solution for you！
Shanghai Freesor Sensor Technology Co. ,Ltd. was founded in 2005 by a number of overseas returnees with rich experience. It is a high-tech enterprise integrating design, research and development, production and sales.
Sales Center Add: Room 1405-1, Building B, 333 Haiyang 1st Road, Pudong New Area, Shanghai
Factory Add:Building 4, Keland Smart Energy Industrial Park, Guangming District, Shenzhen, Guangdong Province, China.
English
Russian
Chinese
