电参数/Electrical characteristics | ||||
型号 Tpye | FSM025AY-100 | FSM050AY-100 | ||
IPN | 原边额定输入电流 Primary nominal input current | 25 | 50 | A |
IP | 原边电流测量范围 Measuring range of primary current | 0~±55 | 0~±100 | A |
ISN | 副边额定输出电流 Rated output current of secondary side | 25 | 50 | mA |
KN | 匝数比 Conversion ratio | 1-2-3-4:1000 | 1-2-3-4:1000 | |
RM | 测量电阻(V=±15V) Measuring resistance (V=±15V) | 54-360 | 68-180 | Ω |
VC | 电源电压 Supply voltage | ±15(±5%) | ±15(±5%) | V |
Ic | 静态功耗 Static power consumption | 15 | 15 | mA |
Vd | 绝缘电压 Insulation voltage | 5KV/50Hz/1分钟 | 5KV/50Hz/1分钟 | |
εL | 线性度 Linearity | <0.1 | <0.1 | %FS |
XG | 精度 Accuracy | VC=±15V 士0.5 | VC=±15V ±0.5 | % |
lO | 零点失调电流 Zero offset current | TA=25℃ <±0.15 | TA=25℃ <±0.15 | mA |
IOT | 失调电流温漂 Offset current temperature drift | Ip=0 TA=-45~+85℃ ±0.5 | Ip=0 TA=-45~+85℃ ±0.5 | mA |
Tr | 响应时间 Response time | <1 | <1 | μs |
f | 频带宽度(-3dB) Frequency Bandwidth (-3dB) | DC~200 | DC~200 | kHz |
TA | 工作环境温度 Ambient operating temperature | -40~+85 | -40~+85 | ℃ |
TS | 贮存环境温度 Ambient storage temperature | -40~+125 | -40~+125 | ℃ |
R | 次级线圈内阻 Internal resistance of secondary coil | 30 | 30 | Ω |
标准 Standard | GI/FS-0105 | GI/FS-0105 |
Dimensions of drawing(mm)
Remarks
1、Incorrect wiring may cause damage to the sensor. After the sensor is powered on, when the measured current passes through the arrow direction of the sensor, the in-phase current value can be measured at the output end.
2、Sensor current input welded to the circuit board should be solid and reliable, and the width of the input wire on the printed board is not less than 1.5mm, the shorter the better, the printed board is best to use double-sided epoxy board, and double-sided wiring, so as not to cause the board to heat for a long time.
Classify | Title | Download |
---|
Leave your contacts and our engineers will help you to find the solution you are looking for.
Hi! Welcome back.
How are you doing?
Let’s talk! We’ll provide the perfect solution for you!
Shanghai Freesor Sensor Technology Co. ,Ltd. was founded in 2005 by a number of overseas returnees with rich experience. It is a high-tech enterprise integrating design, research and development, production and sales.
Sales Center Add: Room 1405-1, Building B, 333 Haiyang 1st Road, Pudong New Area, Shanghai
Factory Add:Building 4, Keland Smart Energy Industrial Park, Guangming District, Shenzhen, Guangdong Province, China.