Fs1000ek2 Ac Current Sensor

Description

Advantages

Parameters

Selection

Download

Elucidation:1:+15V2:-15V3:VOUT4:0V(GND)OFS:Zeroadjustment GIN:Gain adjustment(Red:+15V Blue:-15V Yellow:VOUT Black:0V)

Remarks

1.Incorrect wiring may cause damage to the sensor. After the sensor is powered on, when the measured current passes through the arrow direction of the sensor, the in-phase voltage value can be measured at the output end.

2.The output amplitude of the sensor can be adjusted according to the user's needs.

3.Sensors with different rated input current and output voltage can be customized according to user requirements.

Electrical characteristics
	Type	FS300EK2	FS400EK2	FS600EK2	FS800EK2	FS1000EK2	FS2000EK2
IPN	Primary nominal input current	300	400	600	800	1000	2000	A
Ip	Measuring range of primary current	0~±600	0~±800	0~±1200	0~±1600	0~±2000	0~±3000	A
VouT	Nominal output voltage	4±1%						V
Vo	Supply voltage	±12~±15(±5%)						V
Ic	Current consumption	Vc=±15V <25						mA
Va	Insulation voltage	2.5KV RMS /50Hz/1 min between primary and secondary side circuits
EL	Linearity	<1						%FS
Vo	Offset voltage	TA=25℃ <±25						mV
VoM	Residual voltage	IPN→0 <±25						mV
VoT	Thermal drift of V0	Ip=0 TA=-25～+85℃ <±1						mV/C
Tr	Response time	≤7						μs
f	Frequency bandwidth(-3dB)	DC~20						kHz
TA	Ambient operating temperature	-25～+85						C
Ts	Ambient storage temperature	-40～+100						C
Ru	Load resistance	≥10K						Q
	Standard	GI/FS-0105

Classify	Title	Download

Prev: A-FS300B AC-current sensor

back

Next: FS500EK1 Ac current sensor

A-FS500LTB AC-current sensor

The current sensor using the principle of electromagnetic induction can measure the AC signal current under the condition of electrical isolation, and output 4-20mA DC current output proportional to the effective value of the measured current. They require only a two-wire connection and do not require a separate loop power supply.